Solar pump system for lifting water and irrigation

Product Item：XRI750-350KW

Name: Solar pumping system
Model: XRI750-350KW
Brand: Xrise
Phase: Single phase, Three phase 220/380V
Parts: Solar panel, Mounting structure, Solar pump inverter, AC water pump, Cables, Accessories
Advantage: Low carbon, Saving cost, Stable system, Good quality

System Introduction （AC system）

Our hybrid solar pump system consists of four parts: solar panels, solar pumping inverter, three-phase AC pump and water storage device. The solar pump inverter converts DC power produced by solar panels to AC power, which drives the AC pump to extract water from boreholes, rivers, lakes, etc. to the storage device. The inverter applies the high-efficiency MPPT algorithm to maximize power harvested from the solar panels, producing water as energy-efficiently as possible. The solar pump system meets low carbon, energy conservation, and environmental protection demands while improving the standard of living in water-deficient areas.

Sysem Features

Reliable solution for agricultural irrigation, daily water, or desert control in water-deficient areas without electricty

Wide application with all kinds of PV modules and three- and one-phase AC pumps

IP 65 for outdoor application Max. operating temperature of 60℃ / 140℉

GPRS remote monitoring for real-time operation status and on/off control

Excellent performance during cloudy weather, with 5% more water output compared to the competion

ROI of less than 2 years compared to diesel generator

Fully automatic unatiended operation with perfect protection functions for a lifespan of 25 years

2-year warranty for complete system; 10 years for PV modules

20210127112932_13075(1).jpg

System Parts:

Solar pump system mainly consists of the following components:

Solar array (also known as solar cell array) : composed of multiple solar cell modules in series and parallel, absorb solar radiation energy, convert it into electricity, and provide power for the entire system.

igykiucp_副本(1).png

Control system: usually includes a solar pump inverter, which controls and regulates the operation of the system to achieve maximum power point tracking (MPPT). When thesunshine is sufficient, ensure the rated operation of the system, and when the sunshine is insufficient, set the minimum operating frequency to ensure the full application of solar cell power.

photobank (62)_副本(1).jpg

Motor: used to convert electrical energy into mechanical energy to drive the pump. Common motor types include DC permanent magnet brushless motors and AC asynchronous motors.

Pumps: Take water from deep Wells or water sources such as rivers and lakes, inject it into tanks/ponds, or connect it directly to systems such as irrigation or fountains. Common types are DC pump, AC pump, centrifugal pump, axial flow pump, mixed flow pump, deep well pump and so on.

photobank (61)(1)(1).jpg